Towing Yard at SS Airport [YMAP]
![Route 68 Gas Station [Menyoo]](https://img.gta5-mods.com/q75-w500-h333-cfill/images/route-68-gas-station/522163-20190902170812_1.jpg "Route 68 Gas Station [Menyoo]")
![Tow Yard/Garage/House [MENYOO][YMAP]](https://img.gta5-mods.com/q75-w500-h333-cfill/images/tow-yard-garage-house-menyoo-ymap/3373d7-20191016212737_1.jpg "Tow Yard/Garage/House [MENYOO][YMAP]")
1.161
16
1.161
16
In this map there are a total of 16 garage bays with two different lots where you can use as anything like impound yard or parking extra vehicles you use. The airport hangar is not fully completed, I'm going to be adding a office,waiting room,bathroom and a repair shop inside.Also in the lookout i added a small bedroom inside with a little desk and computer and t.v..Inside the train cart there are car parts inside and out. I hope you enjoy it. Thanks.
_______________________________________________________
Mods I used for this was:
Menyoo: https://www.gta5-mods.com/scripts/menyoo-pc-sp
Map Builder Community: https://www.gta5-mods.com/tools/map-builder
Please follow His instructions and go to his patreon and download GameConfig Package and click where it says download 1.07.
OpenIV:https://www.gta5-mods.com/tools/openiv
If used in a video could you please let me know it was used, I would like to see how you eneded up putting eveything together. Thank you.
_____________________________________________________
Installation SINGLEPLAYER:
1.) Extract the YMAP from the folder and set it on your desktop
2.) Open OpenIV, install it if you don’t have it already
3.) *****Make sure you go into edit mode*****
4.) Click update> x64> dlcpacks> custom_maps>dlc.rpf> x64> levels> gta5> citye> maps> custom_maps.rpf
5.) Then take the YMAP and drag & drop it into OpenIV
_______________________________________________________
Mods I used for this was:
Menyoo: https://www.gta5-mods.com/scripts/menyoo-pc-sp
Map Builder Community: https://www.gta5-mods.com/tools/map-builder
Please follow His instructions and go to his patreon and download GameConfig Package and click where it says download 1.07.
OpenIV:https://www.gta5-mods.com/tools/openiv
If used in a video could you please let me know it was used, I would like to see how you eneded up putting eveything together. Thank you.
_____________________________________________________
Installation SINGLEPLAYER:
1.) Extract the YMAP from the folder and set it on your desktop
2.) Open OpenIV, install it if you don’t have it already
3.) *****Make sure you go into edit mode*****
4.) Click update> x64> dlcpacks> custom_maps>dlc.rpf> x64> levels> gta5> citye> maps> custom_maps.rpf
5.) Then take the YMAP and drag & drop it into OpenIV
Првпат Додадено: Јуни 23, 2019
Последно Ажурирање: Септември 12, 2019
Последно Симнување: Декември 9, 2024
8 Коментари
In this map there are a total of 16 garage bays with two different lots where you can use as anything like impound yard or parking extra vehicles you use. The airport hangar is not fully completed, I'm going to be adding a office,waiting room,bathroom and a repair shop inside.Also in the lookout i added a small bedroom inside with a little desk and computer and t.v..Inside the train cart there are car parts inside and out. I hope you enjoy it. Thanks.
_______________________________________________________
Mods I used for this was:
Menyoo: https://www.gta5-mods.com/scripts/menyoo-pc-sp
Map Builder Community: https://www.gta5-mods.com/tools/map-builder
Please follow His instructions and go to his patreon and download GameConfig Package and click where it says download 1.07.
OpenIV:https://www.gta5-mods.com/tools/openiv
If used in a video could you please let me know it was used, I would like to see how you eneded up putting eveything together. Thank you.
_____________________________________________________
Installation SINGLEPLAYER:
1.) Extract the YMAP from the folder and set it on your desktop
2.) Open OpenIV, install it if you don’t have it already
3.) *****Make sure you go into edit mode*****
4.) Click update> x64> dlcpacks> custom_maps>dlc.rpf> x64> levels> gta5> citye> maps> custom_maps.rpf
5.) Then take the YMAP and drag & drop it into OpenIV
_______________________________________________________
Mods I used for this was:
Menyoo: https://www.gta5-mods.com/scripts/menyoo-pc-sp
Map Builder Community: https://www.gta5-mods.com/tools/map-builder
Please follow His instructions and go to his patreon and download GameConfig Package and click where it says download 1.07.
OpenIV:https://www.gta5-mods.com/tools/openiv
If used in a video could you please let me know it was used, I would like to see how you eneded up putting eveything together. Thank you.
_____________________________________________________
Installation SINGLEPLAYER:
1.) Extract the YMAP from the folder and set it on your desktop
2.) Open OpenIV, install it if you don’t have it already
3.) *****Make sure you go into edit mode*****
4.) Click update> x64> dlcpacks> custom_maps>dlc.rpf> x64> levels> gta5> citye> maps> custom_maps.rpf
5.) Then take the YMAP and drag & drop it into OpenIV
Првпат Додадено: Јуни 23, 2019
Последно Ажурирање: Септември 12, 2019
Последно Симнување: Декември 9, 2024
5mods on Discord
This file has been approved automatically. If you think this file should not be here for any reason please report it.
Menyoo XML Plz
@NICOCRAFT the 1.0.5 is the XML
in future uploads please add the correct title tag and search tag to your uploads
the ramps dont show up for me. Everything else is good i think
@ReNNie We have to download the map builder community file, right?
@Meggawatt9927 Same here @Mcarnes
So guys i have a problem I can't get some of the walls, floors and ceilings to spawn. I have mapbuilder as a resource and some of them spawn now , but the most important the ramps still won't spawn. Anyone else have this issue and know a fix?